Benefits of Becoming a Street Lighting Installation

Become a street lighting installation! This article will discuss the requirements and duties of this job. You can also learn more about the different types of street lighting and their different types. In addition, you will discover how to install them in the best way. Read on! You will be glad you did! There are many benefits of becoming a street lighting installation clerk! Listed below are some of them:

Description of job

A street light technician performs various maintenance and repair tasks, interpreting contracts and specifications. These technicians also troubleshoot electrical problems in underground wires and streetlight equipment. They monitor streetlight systems in assigned areas and identify downed poles and report problems. They must maintain inventory levels of street lighting materials and initiate requests for new materials. They may also attend pre-construction meetings to ensure that all requirements are met before the project starts.

A Street Lighting Technician I performs entry-level tasks, gaining on-the-job training in the field. The technician may perform maintenance and repair tasks on his or her own, but most often, they work under the supervision of a Street Lighting Technician II and Traffic Control Supervisor. This position requires a high school diploma or equivalent. There are certain job responsibilities that are common to all street lighting technicians. Here is a brief description of the job.

Duties of street lighting installation clerk

The duties of a street lighting installation clerk include overseeing the work of other employees and performing maintenance tasks for street lighting facilities. They oversee street light installation crews and troubleshoot electrical problems that may arise in underground wiring. They also perform regular field inspections, make recommendations for improvements, and coordinate with various utility companies and private contractors. Some of their responsibilities include inventory control and initiating requests for new materials. They may also conduct investigations and make recommendations for a city’s streetlighting system.

Street lights are installed on power poles, which are often referred to as power poles. The majority of these lights are high pressure sodium (HPS) or equivalent LED bulbs. They are operated by automatic photoelectric controls and turn on and off at dusk and dawn. Street lighting installation clerks also maintain over 4,000 lights located at community ball fields, parks, and other City facilities. They also share responsibility for lights on freeway off-ramps.

Read Also : 7 Amazing Facts about Traffic Lights

Methods of installation

Street lighting can be arranged in one of three ways. One-sided spacing is used on roadways with fewer than three lanes. For roads with six or more lanes, alternate spacing is used. In addition, one-sided lighting is recommended for intersections. The opposite spacing is used when there is ample room for a light standard. Both types of lighting must be located parallel to the roadway and avoid side lot easements and intersections with underground conductors.

To ensure uniformity in the street lighting installation, the height of street lights is important. The height of streetlights must be higher than the road surface, and the distance between the base plate and the pole is shorter than the road’s surface. In addition, the height of streetlights should be uniform, especially if the lighting is to light multiple intersections. In general, the height of the streetlights determines the distribution.

Requirements

If you are installing streetlights in your community, you must comply with City codes. The height and spacing of light poles should be calculated according to the specific road condition, and you should consider any structures that may obstruct traffic. The table below shows common road conditions and the corresponding pole height, spacing, and boom. A diagram illustrating the proper pole placement is also provided. These specifications can be helpful in planning the street lighting layout for your area.

Lighting for the road must provide adequate illumination to all points along its perimeter. This can be achieved by using the SR index. The SR value is the ratio between the average road brightness and the minimum brightness. The ideal value of the SR is 0.50. Lighting facilities must calculate and meet the SR index for street lighting. Lighting illuminance for roads should meet standards set by IES, based on CIE, and should be designed according to street lighting guidelines.

Cost

Whether you want to illuminate your streets, roads, or any other public space, the cost of street lighting installation depends on the type of lights you choose. Traditional street lights, which use coal and are grid-tied, can be very expensive. LED street lights have a much lower initial cost, but they will require regular maintenance and replacement of light bulbs. A 100-watt metal-halide street light will illuminate a road for 12 hours per day, resulting in an ongoing monthly cost of $1300 to $800 per set, including installation and maintenance.

Light poles add to the cost. Standard poles range from forty to 55 feet tall, while ornamental poles are only about 22 feet high. Standard poles are usually made of round-tube aluminum and are around four inches thick. The thicker the pole, the more material it will require and the higher the installation cost. In addition to the pole height, there are other factors that determine the price of street lighting installation. A city’s lighting policy will dictate the type of poles it requires.