Connect with us
Sports and casino betting - only with the Mostbet mobile app

Drain cleaning – Causes of blockages and their solutions

News

Drain cleaning – Causes of blockages and their solutions

Building users need a clean water supply and efficient waste management to run their operations efficiently. Proper disposal of waste from a building ensures that the environment is healthy and safe for use by owners and tenants. There comes a time when the pipes get clogged for various reasons. A qualified plumber is therefore necessary to clean the sewage system. This ensures that garbage disposal repair Burleson TX is properly removed from the building, creating a clean environment for users.

Why sewer cleaning?

In every building it is sometimes necessary to clean the sewerage due to clogged drains. Clogged drains can have various causes. Foreign objects that are too large to go down the drain can be flushed down the toilet. Hair can wash in the sink and collect in the drains, creating a blockage. Grease and greasy substances that are normally flushed down the sink stick to the walls of the drain pipes. Over time, the pipes become clogged due to a build-up of these substances. Leaves that are not swept up and thrown into the trash can easily enter the drains and cause blockages. Even tree roots block drains because they are attracted to moisture. They break the pipes to get to the water and cause a blockage.

Pipe cleaning with hydro jet

A plumber can use a jet of water to clean the drain. A hydro jet is a gadget that releases water under very high pressure to remove dirt with clogged pipes. The water jet is lowered into the drain and pushed until it reaches the area where there is a blockage. The pressurized water will break up the blockage into small particles. There are also nozzles on the sides of the hydro jet that produce a spray that removes particles stuck to the sides of the tubes. The water pushes the clog down the drain, allowing the waste to flow unimpeded.

Drain hose

A drain hose, also known as a drain auger, is a long flexible line made up of wires that are pushed down the drain to the area where there is a clog. A motor then spins the wires at the end of the cord, which break down the objects causing the blockage into small particles. These particles are then pushed down the drain to clear the blockage and allow debris to flow freely down the drain. Alternatively, the plumber can clear the blockage and thus clear the drain. There are also drain coils that do not use a motor and so the plumber has to manually turn the gizmo until the clog is caught and flushed away.

Identify the blockage

In order to have the drain cleaned effectively, it is important to determine where the blockage is and what the nature of the blockage is. This allows the plumber to use the correct approach to water line slab leak repair Burleson TX the drain. Video pipe inspection uses small cameras that are lowered into the pipe so that the plumber can see inside the pipe and provide the correct solution.

Continue Reading
Advertisement
You may also like...
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

More in News

Advertisement

Trending

Advertisement
To Top